What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
08.06.2025 00:40

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
I post the exact comment here.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
The other is “what does a “fuse” do?”
A fuse is a non-resetable over current circuit protector.
But it can get overloaded, and no longer works.
A two-player Elden Ring Nightreign PC Mod is already available - Eurogamer
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
These devices are installed between the “hot” and “neutral” and protective ground.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
[old diagram got deleted by accident]
(Dc diagram shown, AC is similar).
2024–10–14 [Omar Gharbi Omar Gharbi ]
There are three different concepts here that are getting confused.
Why do I sweat so much at the gym?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
[image of Common-mode choke]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
The third is lightning and “how it gets conducted into a home.”
I can not sleep. what is the problem?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
He then describes Rainy Season and Lightning.
23andMe Sets New Auction With $305 Million New Bid From Ex-CEO - Bloomberg
What does a fuse do?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
For this case there are devices called Metal oxide varistors (MOV).
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This one hit behind the barn.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Why would an older small breed dog become obsessive about hygiene?
nine
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
He then asserts :
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
But… the neutral is now “floating” because of the 1 ohm resistance.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
This is 'the assistant's answer'
What is lightning?
There are two important concepts here.
It seems Mohan does not understand the difference between a comment and an Answer.
so, what happens?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
The bolt then partially travels down the line to your home.
a photo is worth a thousand words.
2024–10–10[John johnson John Johnson ]
One
This is where the MOV conducts again, and dissipated the energy.
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–16 [ OO OLAOYE OYEBODE ]
This is where this question deviates from being a 'generic' question, and becomes more specific.
One is “what exactly is in a ‘surge protector’ ? ”
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
but I think this circuit , shows a few more pieces.
At one ohm, the resistor has a maximum of 1 watt power.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Upvotes:
In schematic diagrams this is the symbol for a fuse:
At least they know the answer if they wanted it.
but this device (an Inductor) … impedes the rapid changes in the current.
First Sentence:
He then describes the function of a fuse.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
So, the voltage could go up to 500 volts, and the fuse will not open up.
Now when you have a certain ac resistance, then a current flows in a loop.
An AC voltage/ current source, and an ac inductive load.
what exactly is a ‘surge’ protector?
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Barnstars:
eight
It also is a device that limits the change in current flow.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Here is a simplified AC power diagram.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
These are simplified answers to the original question, and does not change anything I wrote above.
This device then solves the entire problem.
the problem then depends on "how fast does the fuse operate?".
A circuit breaker is similar, but is resettable.
Edit 2024–10.